VIP350W Christie Projector Lamps
Original Projector Bulb 003-100857-01 VIP350W Compatible For
Christie DS+10K-M HD+10K-M HD10K-M
Original Optoma projector lamp 003-100857-01 P-VIP350/1.3 E21.8 , compatible for DS+10K-M HD+10K-M HD10K-M Mirage DS+10K-M Mirage HD10K-M Mirage
WU12K-M Roadster HD+10K-M Roadster HD10K-M Roadster S+10K-M
Roadster WU12K-M S+10KM WU12K-M WX10K-M . You can be assured each lamp has undergone strict quality checks
for beam performance, ignition, voltage, appearance, connections
and run-time, so you can trust it to work flawlessly in your
projector.
Specifications:
| lamp model | 003-100857-01 |
| power | P-VIP350/1.3 E21.8 |
| works for Optoma | DS+10K-M HD+10K-M HD10K-M Mirage DS+10K-M Mirage HD10K-M Mirage
WU12K-M Roadster HD+10K-M Roadster HD10K-M Roadster S+10K-M
Roadster WU12K-M S+10KM WU12K-M WX10K-M |
| life expectancy | 4000-6000hrs |
| warranty | 180 days |
| MOQ | 1PC |
| we provide | original lamp compatible lamp lamp with housing |
Warm Noted:
Be sure to use an P-VIP350/1.3 E21.8 Projector Lamp for
replacement.
Be sure to turn off the unit and unplug the power cord before
replacing the lamp
The lamp remains hot after the unit is turned off with the TV.
If you touch the lamp, you may burn your fingers. When you replace
the lamp
Wait for at least 0.5 hour for the lamp to cool. Do not touch the
surface of the lamp
If you touch it, wipe off the fingerprints with a soft cloth
Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then
open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up
the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it
reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.
