Home > Panasonic Projector Bulbs >

NSHA230W Panasonic Projector Bulbs ET-LAV300 With Burner Inside

Product Categories

Guangzhou Shusen Trading Co., Ltd.

Contact Now

NSHA230W Panasonic Projector Bulbs ET-LAV300 With Burner Inside

Ask Lasest Price
Brand Name :	Panasonic
Model Number :	NSHA230W
Price :	Negotiated
Payment Terms :	L/C, D/A, D/P, T/T, Western Union
Supply Ability :	1000 pieces per year
Delivery Time :	3-7 work days

Add to Cart

Product Details
Company Profile

NSHA230W Panasonic Projector Bulbs ET-LAV300 With Burner Inside

NSHA230W Panasonic Projector Bulbs ET-LAV300 For Business new high brightness

NSHA230W Panasonic projector bare lamp , all items are 100% new and pass the quality checked. And will be packaged in good condition before dispatch. 100% Brand New, Premium quality, high brightness, long life replacement projector lamp. Compatible for PT-BX441C,PT-VX430,PT-VW360,PT-BW410C,PT-BW370C,PT-BX420C,PT-VX410Z,PT-VX420,PT-VX425N,PT-VW350,PT-VW355N,PT-BW400C,PT-BX435NC,PT-BW405NC,PT-VX415NZ,PT-VX42Z,PT-VW345NZ,PT-VW340Z,PT-BX410C,PT-BX431C,PT-BX430C,PT-GW301C

Specifications:

Product name:	Projector Lamp
Model No.	NSHA230W
Condition:	100% Brand new
Type:	Compatible Bare lamp
Lamp power:	230W
Life time :	≥2000-5000HourS
Used in the these projector:	PT-BX441C,PT-VX430,PT-VW360,PT-BW410C,PT-BW370C,PT-BX420C,PT-VX410Z,PT-VX420,PT-VX425N,PT-VW350,PT-VW355N,PT-BW400C,PT-BX435NC,PT-BW405NC,PT-VX415NZ,PT-VX42Z,PT-VW345NZ,PT-VW340Z,PT-BX410C,PT-BX431C,PT-BX430C,PT-GW301C
Installation:	Easy installation.
Warranty:	All items have been QC tested and 90 days Warranty at least
Package:	Each lamp in a single box with foam protection. One pair gloves and instruction inside.

If you want your Projector Lamps work longer, please Note:

1. Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot.
3. Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters should be cleaned regularly.
4. Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.
5. Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode
decreases projector brightness but the lamp will last longer.
6. Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.

Installation:

1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.

Product Tags:


*From:	Your email address is incorrect!
*To:	Guangzhou Shusen Trading Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!